45 degree deck rail brackets (2023)

Set of 4(2) T-Rail Bracket(12) Screw Hole Plugs(8) 1-1/2" Screws(4) 1" Screws + (4) Snap Caps - Self Drilling Great Railing provides Quality Decking, Fencing, & Railing plus a whole lot more. We carry a large selection of Vinyl, PVC, and Composite Deckings.. "/>

45 degree deck rail brackets

A connector kit can help your project come together quickly when you're building a deck railing, They support rails at the point where they attach to posts and also allow you to install balusters without needing a router. Choose plastic or metal deck connectors in black, white, silver or bronze to match your balusters.. These Brackets allow horizontal angles 15 degrees to 45 degrees Available in White, Tan or Clay color options. 2″ x 3.5″ - Railing Bracket Kit Vertical Adjustable White, Tan or Clay: $88.00 2″ x 3.5″ Vertical Adjustable Bracket kit includes (4) 2″ x 3.5″ rail brackets and fasteners. Very easy to install. The 22.5 degree Panel Attach Kit is used to secure railing panels to posts to form a 45 degree angle. The kit includes four aluminum U-brackets and 16 screws. One kit will attach two panels to one post. This is an original part and is not included with Railing Panel kits. The Williams-Interlocking advantage uses a hidden fastener system to create a sturdy railing system that is textured. kevlar carbon fiber canoe

  • These fittings install to deck with #10 fasteners (not included). Fittings can be attached to railing... Choose Options. Quick view. Sea-Dog Round Base 7/8" Rail Fittings, Stainless Steel. List Price: $15.99 ... Sea Dog Rail Mount Bracket Injection Molded Nylon/Stainless. Sold as pair. ... Sea-Dog Chrome Plated 60 Degree Handrail Tee - Left. US: On our “Where to Buy” page, click on our Online Dealers to view the products they sell. Canada: Call our Customer Service line at +1 800 667-8247 or email us at [emailprotected] and our team will work with you to connect you to a storefront. Hours of. • For deck applications, install 2 pieces of 2x8 (min.) blocking. • Drill 3/8" holes through decking ... IMPRESSION RAIL™ 45°Bracket Holes 22 ½ ° Bracket Holes. Page 10 Installing Impression Rail Site Cut Angled Brackets 1 • Cut the Site Cut Brackets to the desired angle, not.

    north west recycling jobs

    • No Disclosures
  • A connector kit can help your project come together quickly when you're building a deck railing, They support rails at the point where they attach to posts and also allow you to install balusters without needing a router. Choose plastic or metal deck connectors in black, white, silver or bronze to match your balusters.. Buy Boat Hand Rail Deck Fittings and get the best deals at the lowest prices on eBay! ... Pair Marine Stainless Steel 316 Central Handrail Bracket Tube/Rail 22mm or 7/8" £25.95. Click & Collect ... Click & Collect. Free postage. SPONSORED. Marine Stainless Steel Boat Deck Hand Rail Fitting 90 Degree 25mm ID Tube Acc. £13.40. Free postage. or. Stainless Steel 45 Degree Round Plate Handrail Bracket Material:304 or 316 stainless steel Finish:brushed or polished. MENU. EN; View ... Architectural Railing. Handrail Mounted Bracket. Wall Mounted Bracket; Glass Mounted Bracket; Handrail Support / Saddle Stem. Round Tube Support; Square Tube Support; Handrail Connector Elbow. Round Tube.

    astra border collie

    • No Disclosures
  • Stair Rail Kits. Veranda ® HP Railing is the perfect compliment to Veranda contoured decking and is available in two accent colours: white and black. The concealed mounting hardware allows for fast, easy installation and provides a clean, seamless appearance. The pre-drilled rails assure proper spacing and ease of assembly. ALX Classic 45-degree Railing Angle Adaptors (Set of 4) by Deckorators. From $73.99 ($18.50 per item) $78.99. ... For horizontal deck or porch railings, use ALX Classic In-Line Deck Rail Brackets (item #351858). . Pack of 4 brackets is enough to install one railing section. Product Type: Porch and Stair Railings; Primary Material: Metal;. The 45° T-Rail Handrail Bracket Kit includes everything you need. Designed and manufactured by LMT, these brackets are made of high-quality, durable vinyl that will not fade, discolor, or warp over time. This kit includes the screws necessary for installation. $8.0936 each. $8.0936 each. OR..

    asatru online

    • No Disclosures
  • Quantity Breaks. Galvanised 45 degree acute angle "T" bracket suitable for our Brundstrut channel support system. The easy-to-install alternative to conventional support methods is especially suitable for use with cable trays and cable ladders. Support structures can be easily designed and quickly installed, with minimum effort. Horizontal Railing; Deck Gates . Gates ~ Gate Hardware; ... 45 degree Mounting Bracket by RDI. $39.99 - $45.99. Choose Options. RDI. Titan Pro Level Bracket Kit by .... • 1 Line Bracket Required for Every 6 Feet of Handrail. • Available in White Only. 1-1/2" Dia. x 104" Code Price R0H15 Reinforced Handrail Size Code Price 5 Degree R0HE5 32 Degree R0HE32 36 Degree R0HE36 Elbows Corners Code Price R0HPL P Loop 90 Degree Code Price R0HR90 Return Brackets End Caps (Pair) Mounting Block Connectors Type Code.

    hackerrank fizzbuzz java

    • No Disclosures

terrible christmas gift ideas

parish episcopal school scandal

Round Rail Base-45 Degree: Round Rail Base-60 Degree: Round Rail Base-90 Degree: Rectangular Base-30 Degree: Rectangular Base-45 Degree: Rectangular Base-60 Degree: ... Deck Hinges-90 Degree/Concave: Deck Hinges-80 Degrees/Side: Removable Pin Sets: Footman’s Loop: Fixed Bimini Clip: Swivel Web Clip:. 22 1/2 Degree Adapter / 45 Degree Adapter / Round Column Adapter: Landmarke 3-Rail Stair Bracket Adapter Kit: Landmarke Bracket Adapters: White $30.65: White $42.67: Khaki $33.54: Khaki $51.00: Almond $31.69. Almond $49.00. 4. Hold a deck railing mount bracket on the spot you marked on the wall. Drill pilot holes through the openings on the bracket, through the exterior surface of the house and into the sheathing.

Great for creating a 45 degree angle on your deck railing Brown composite matches Deckorators composite posts and rail kits Easy to install with included hardware Includes two top rail bracket adapters, two bottom rail brackets and hardware Additional line brackets-model #443943 Backed by a 25-year structural and stain and fade limited warranty. Wall Railing Brackets and Components; Railing Fittings. Kee Klamp Galvanized Fittings; Kee Lite Aluminum Fittings; Kee Access ADA Handrail Fittings; ... The RailEasy™ Tensioner features a patented base which allows it to angle up or down to 45 degree, making it ideal for stair applications. View Detail. Atlantis S0980-0002 RailEasy™ Cones 4. Note that 200 Series is available 32 to 36 degree step angle rails. A. Porch and Deck Railing System: 200 Series Railing: Provide with Top and bottom rail brackets as required. No visible hardware or screws are permitted. Provided with snap-on screw covers with hidden bracket screws. 1. Rail: Reinforced with extruded aluminum channels.

  • how to highlight a section break in word

  • ef core cosmos db example

  • 5x5 gaussian filter python

  • watts bar park

  • ford excursion towing capacity v10

  • why would a guy keep tabs on you

    (Video) Color Guard Tip #3: 45º Angle Bracket Installation

  • rural fire brigade raffle

    • ap statistics unit 4 review answers

    • properties company

    • wix editor transparent header

    • spicer marine basin

    kristin fisher husband

    mofo real estate

    linux delete all partitions on disk

    names that mean wonder

    • buggs island camping

    • spanish song father calls son
      (Video) 45° Column Adaptor Bracket Installation

    • sonic ports

    waterproof cushion

    python sqlite update

    metformin and adderall weight loss

    • car accident nj turnpike today

    • pirates of the caribbean 2 summary

    • adguard pro free ios

    • used alpine double din

    • stratos 3000 ltss

    • pico school boyfriend

    • 5th gen ram bed cap

    • navy seal buds classes

    • chainsafe docs

    • woocommerce advanced notifications

    • rimworld clothing stats

    • Cedar Wood Brackets FlowerWindowBoxes.com is a direct fabricator and custom manufacturer of cedar wood brackets.We have a wide selection of hundreds of brackets and cedar wood corbels throughout our web store and we are adding new products each day. Cedar is one of the finest materials to make decorative architectural brackets from due to its inherent ability to. At McLean Railings, we have over 25 years of experience in the deck railing industry. In other words, we know what we’re doing, and we extend every effort to ensure the delivery of an innovative, well-made product that is easy to install and looks great, from glass deck railings to outdoor stair railings.We work directly with our manufacturers in designing and producing a. Details. Fortress Railing Products offers 45 Degree Nylon Rail Bracket sets which makes ....

    • sql max in where clause

    • how to use osu kps

    • charcoal bbq grill singapore

    bridge token

    tv file transfer pc

    northampton community college financial aid

    • fire ant queen for sale

    • 2016 volvo xc90 timing belt or chain

    • theophylline ephedrine hcl

    (Video) Bracketology: Connecting with Color Guard vinyl brackets

    baby shower wishes for friend

    rizzoli and isles fanfiction

    what is dynamic memory allocation in java

    • georgetown debate tournament 2021

    • how old is vicki donovan

    • midfield high school basketball

    idaho sheriff

    osenaga michael orokpo age

    chapter 6 test form 1 geometry answers

    • apology quotes to girlfriend

    • We're Here 1-888-824-5316 We Always Love to Help Details Horizontal 45 degree rail installations are a breeze with the Bird's Mouth Rail Gasket Pack. It includes the necessary adapters that work in conjunction with rail support brackets to securely attach a rail to the post. Gaskets are included for all rail profiles to finish the look. . Brackets are included with your Select Railing kit, this bracket kit is only needed when extra brackets are needed, such as when cutting 1 section of railing in half to create 2 sections. This bracket kit only works with 5-2/3 ft. x 36 in. Select White Vinyl Rail Kit with Square Balusters (73012418) and 7-3/4 ft. x 36 in. Select White Rail Kit.

    • Build a rail to match your Veranda™ deck with Veranda Composite Railing kits. Just like our decking materials, Veranda railing components come in four colours: cedar, redwood, grey, and Tuscan walnut. A variety of decorative post caps are also available to. In order to keep proper deck joist spacing, simply install the Fortress Evolution Steel 45 Degree Bracket to create the ideal angle for your unique deck design and layout. The Fortress Evolution Steel 45 Degree Deck Bracket is sold individually in a sleek textured Black Sand finish. Specifications Complete Your Project Reviews & Questions. This item: 45 Degree Bracket Adapter Kit $23.41 Veranda Traditional/Williamsburg White Angle Bracket Kit (4-Pack) $24.64 Veranda 4 in. x 4 in. x 100 in. White Traditional Post Jacket $27.99 Product Overview Titan pre-assembled, galvanized steel posts eliminate the time consuming task of installing brackets on the job.

    great loop crew wanted

    what channel is espn plus on metronet

    lipo lab injections

    (Video) Installing on 45° Angles and Corners | Regal ideas Aluminum Railing

    (Video) 45 Degree Adapter By Durables

    FAQs

    How do you measure the angle of a deck railing? ›

    Put it flush on the face. So i'm planing out flush on the face of the 2x4. And that gives me 142 is

    See Details
    How do I make my deck railing more secure? ›

    I just want to make sure that these railings are more secure. The simplest most affordable way to do

    Tell Me More
    How high off the deck should the bottom rail be? ›

    Deck stair railing should measure at least 34 inches high.

    The IRC specifies that deck stair railing should measure between 34 and 38 inches high, so homeowners may wish to use railing that is even higher than 34 inches for their deck stairs.

    Read The Full Story
    How far apart should rails be on a deck? ›

    Spacing: In general, according to the International Building Code IBC, manufactured deck railing posts should be spaced no more than 8 feet apart. If deck railing posts are spaced further apart than 8 feet, it becomes exceedingly difficult to meet safety requirements given that they should withstand up to 200 lbs.

    Learn More
    What angle do you cut handrail? ›

    Start by cutting a 45-degree angle on one end of the stair railing and rest this end on the floor. This cut is for the short return to the wall.

    Read On
    How do you Mitre a deck railing? ›

    How to Miter Cut Your Handrail - YouTube

    Discover More Details
    How do you support a deck railing? ›

    Build a Stronger Deck: Guard Post Connections - YouTube

    Read On
    Is 42 inch railing too high? ›

    The IRC requires guardrails to be at least 36" in height measured from the deck surface to the top of the rail. Commercial decks attached to multifamily buildings, such as apartment buildings or businesses, are regulated under the Internation Building Code (IBC). The IBC requires 42" high guardrails.

    View More
    How long can a railing be without a post? ›

    U.S. building code requires support posts for the rail structure to be no further apart than 6 feet on a deck with 4×4' deck rail posts and no more than 8 feet apart for decks with 6×6' deck rail posts. Posts should be no further apart than 5.5 feet on stairs.

    Find Out More
    How far apart should spindles be on a deck railing? ›

    Balusters are the vertical guards that support the handrail. They must be installed close enough that the space between them is less than 4 inches. Most city inspectors carry a 4-inch ball with them to test the spacing. Installed balusters should withstand 50 pounds of pressure exerted over a 1-sq.

    Keep Reading

    Should deck posts be 4x4 or 6x6? ›

    Deck posts must be a minimum of 4×4 according to the IRC but many jurisdictions require a 6×6 post as a standard. To avoid code violations, many deck builders choose the 6×6 even if the 4×4 is acceptable.

    Get More Info Here
    Can you use 2x4 for deck railing post? ›

    Whatever a 2x4 can withstand is irrelevant. Guardrail posts are to be at minimum 4x4s. The top rail is to be a 2x6 with a 'cap'. Maximum span for a railing between two posts is 4'.

    Continue Reading
    How tall should deck rail posts be? ›

    (a) A standard guardrail shall consist of top rail, midrail or equivalent protection, and posts, and shall have a vertical height within the range of 42 inches to 45 inches from the upper surface of the top rail to the floor, platform, runway, or ramp level.

    Read The Full Story
    How many brackets are needed on a handrail? ›

    Determine how many brackets you need. You need one at the top and one at the bottom. You also need additional brackets, spaced no more than 4 feet apart in the middle of the handrail to provide additional support.

    Get More Info Here
    How far apart are handrail brackets? ›

    We recommend spacing the Brackets 36 to 48 inches apart. In most cases, it is desirable to transition the Handrail past the last stair with a horizontal rail of 6 to 12 inches. Some local codes require this extension be 12 inches. Contact your local authorities to confirm requirements.

    Explore More
    Are stairs 45 degrees? ›

    The standard angle of a staircase depends on the use case and application for the stair. For most standard stairs, the stair angle varies between 30 degrees and 45 degrees. Egress stairs have a shallower angle around 30-35 degrees while industrial stairs have steeper angles ranging from 40 to 70 degrees.

    View More
    Should deck boards be butted together? ›

    There is no reason to put a gap between the ends (also known as butt ends or butt joints) of wood deck boards. Wood, both softwood and hardwood, is dimensionally stable in length regardless of temperature, humidity or moisture content. Keep the butt ends as tight as possible when installing wood decking.

    Know More
    How do you cut 45 degree deck boards? ›

    Cut Boards

    Choose two straight boards and cut one end of each at a 45-degree angle. A 10-inch power miter saw will not cut all the way across the board. Complete the cut with a handsaw. If you are experienced using a power miter saw, lift up on the forward edge of the board to finish the cut.

    Discover More
    How do you miter a corner on a deck? ›

    Build a patio deck with a mitered frame using MultyDeck! - YouTube

    View Details
    How do I attach a railing to a post? ›

    How to Fix a Handrail to a Newel Post | Cheshire Mouldings - YouTube

    Know More

    Can you use structural screws for deck posts? ›

    For deck framing, structural wood screws such as Simpson SDS 1.5” screws work with joist and stringer hangers, as well as post/beam brackets. Railing posts require ½” diameter galvanized or stainless steel through bolts, while railings will need 3.5” coated deck screws for balusters and rails.

    Discover More
    Do deck balusters go inside or outside? ›

    Installation Steps

    You can choose to install them either inside or outside the rim joists, but most code requirements have them installed inside. Some very small decks will use uncut posts that extend above the rim joists and around the perimeter as the rail posts.

    View More
    Is it OK to notch deck railing posts? ›

    The notching of deck railing posts is generally considered to be a building shortcut that should be avoided, as it can potentially create a weak point in the post while simultaneously making it vulnerable to cracking or splitting and allowing for moisture between the post and deck.

    Read The Full Story
    How do you attach spindles to a deck railing? ›

    How to Assemble Deck Railings with Wickes - YouTube

    Tell Me More
    How do you fix a sagging railing on a deck? ›

    Simple Solution:

    Long spans of porch or deck railing will, over time, start to sag in the middle. To straighten out the railing, cut a tapered block out of a 2×6 and wedge it under the middle of the railing. Secure the block to the decking or porch floor with two decking screws.

    Know More
    How do you fix a loose outdoor railing? ›

    How To Fix A Loose Exterior Railing-Tutorial - YouTube

    Show Me More
    How do you fix a wobbly wood railing? ›

    How to Tighten a Loose Newel Post | Ask This Old House - YouTube

    See Details
    How high should a railing be on a balcony? ›

    Guards for residential decks and balconies need a height between 36 inches and 42 inches, depending on the height of the surface above grade. The required height for railings is between 34 inches and 38 inches, measured above the finished stair tread nosings.

    Learn More Now
    How high should a railing be on a porch? ›

    The IRC requires guardrails to be at least 36" in height, measured from the deck surface to the top of the rail. Note that some local jurisdiction or state require higher, such as 42" in California.

    See Details
    What is code for horizontal deck railing? ›

    The IRC (International Residential Code) requires that deck railing be at least 36″ in height. This should be measured from the deck or porch surface to the top of the railing. But you should also check your local building codes because counties and cities may have different requirements.

    Read More

    Do you need posts for deck railing? ›

    The Importance of Railing Posts for Deck Building

    Railing is an essential piece of framing for any deck that's higher than 30 inches off the ground.

    Discover More
    How many bolts should be in a deck post? ›

    Bolts (at least 5 in. long for 4×4 deck posts, 2 bolts per post) Power drill. Long drill bit (same length as the bolts)

    Continue Reading
    Can you use lag screws for deck posts? ›

    At connections carrying structural loads, such as deck ledgers or railing posts, use through-bolts or lag screws. Through-bolts are stronger and should be used where possible. For the heaviest connections on a deck, such as where ledgers attach to the house or to posts, use 1/2-inch bolts or lags.

    Continue Reading
    What is the maximum gap between balusters? ›

    U.S. building codes mandate that balusters have no more than a 4-inch gap between them. This relatively tight amount of spacing still allows for visibility between spindles, but also stands as a safety measure to prevent small children from becoming stuck between spindles or from slipping through the balusters.

    See Details
    What is code for distance between balusters? ›

    Baluster Spacing and Building Codes

    US building codes require that the space between balusters be no more than four inches—assuring that small children can't slip through or get stuck between them. They must also be able to resist up to 50 pounds of pressure exerted over a 1-square foot area.

    Learn More
    What is the difference between balusters and spindles? ›

    A baluster and spindle is actually almost the same thing, but the word spindle is more commonly used because it is easier to remember and say. Balusters usually rest on a footing; this could be a step, floor or deck, whereas, spindles are supported by a horizontal rail at the bottom that is attached to the posts.

    Keep Reading
    How do you measure a railing? ›

    Measuring Handrail Length

    The length of the handrail's sloped section is measured on a line running along the nosings of all steps. This line starts at the nosing of the top landing and runs to the floor at the lower end.

    Learn More
    How do you cut stair railing angles on a deck? ›

    How To Figure Out Stairway Guardrailing Angle? - YouTube

    Discover More
    How do you cut angles on a deck? ›

    Cut Boards

    Choose two straight boards and cut one end of each at a 45-degree angle. A 10-inch power miter saw will not cut all the way across the board. Complete the cut with a handsaw. If you are experienced using a power miter saw, lift up on the forward edge of the board to finish the cut.

    Learn More
    How do you build a wooden handrail for outdoor steps? ›

    How to make deck / porch railing easy with just 2x4's DIY Home ... - YouTube

    Read On

    How many brackets are needed on a handrail? ›

    Determine how many brackets you need. You need one at the top and one at the bottom. You also need additional brackets, spaced no more than 4 feet apart in the middle of the handrail to provide additional support.

    Discover More
    How long can a railing be without a post? ›

    U.S. building code requires support posts for the rail structure to be no further apart than 6 feet on a deck with 4×4' deck rail posts and no more than 8 feet apart for decks with 6×6' deck rail posts. Posts should be no further apart than 5.5 feet on stairs.

    Explore More
    Where should a handrail start and stop? ›

    Where should a handrail start and stop? Handrails should ideally be fitted from the pitch line of the stairs, which is on top of the nosing at the edge of the stair treads. They should ideally continue down the length of the stairs.

    Discover More
    What is the standard angle for a staircase? ›

    Standard stair angle by application

    Standard stairs have an angle of 30 to 50 degrees while steep stairs like alternating tread stairs and ship stairs have an angle between 50 and 70 degrees. Ladders have an angle range between 60 and 90 degrees.

    See More
    How do you calculate the angle of a staircase? ›

    How To Calculate Angle of Stairway With Scientific Calculator - YouTube

    See Details
    How do I put rails on my deck stairs? ›

    How To Build a Deck | Wood Stairs & Railings (4 of 5) - YouTube

    See Details
    How do you lay a 45 degree deck? ›

    DIY Floating Deck | PART 2 | decking on a 45-degree angle - YouTube

    Know More
    How do you install a 45 degree deck? ›

    Installing Composite Decking on an Angle With a Cool Inlay - YouTube

    Read More
    How do you measure for a 45 degree cut? ›

    How to Mark Miter Cuts. Miter cuts are angled crosscuts, which most often measure 45 degrees. For a 45-degree cut, measure to the long end of the miter, and set your combination square or layout square on the mark.

    See More
    Can a 2x4 be used as a handrail? ›

    According to the IRC (2018), you can use a 2×4 to make a handrail, but you must cut finger recesses along both sides of the board and position the lumber lengthwise on its end. Using a 2×4 as a handrail laid vertically is not allowed. Porch and deck guardrails made from 2x4s laid horizontally are permitted.

    Keep Reading

    Can you use 2x4 for deck railing post? ›

    Whatever a 2x4 can withstand is irrelevant. Guardrail posts are to be at minimum 4x4s. The top rail is to be a 2x6 with a 'cap'. Maximum span for a railing between two posts is 4'.

    See More
    How do you make a simple wooden handrail? ›

    How to Build a Simple Wood Rail for Stairs to a Basement - YouTube

    Discover More

    Videos

    1. How to Install Trex Transcend Deck Railing | Trex
    (TheTrexCo)
    2. Deck Railing, obtuse angles, tips/ tricks
    (Mayer Construction)
    3. Modern Deck Railing Using These Cheap And Easy To Install Aluminum Balusters And Rail Brackets
    (Ron The DIY Guy)
    4. Joe's Tips & Tricks - Installing Avalon Oberon Deck Top Rail at a 45 Degree Angle
    (RDI by Barrette Outdoor Living)
    5. How to Install Composite Deck Railing Video
    (HomeAdditionPlus)
    6. Multi Angle Bracket Install
    (Preferred Aluminum Railing)
    Top Articles
    Titanic Vs Modern Cruise Ships (Size Comparison)
    Carnival Cruise Smoking Areas By Ship: Where You Can Smoke On A Carnival Cruise
    How the Company Behind Uggs, Teva and Hoka Makes Ugly Brands Cool
    Breville Toaster Oven Problems And Fixes {TroubleShooting}
    Industrial & Commercial Building Codes For Stairs {IBC & OSHA}
    El largo camino de un ciclista hacia la recuperación del cáncer de páncreas
    At 20 weeks pregnant, she was diagnosed with cervical cancer — how this loving mom managed it
    Latest Posts
    Audi activesphere concept, sul crossover coupé debutta la mixed reality
    Audi Activesphere Concept - Massima espressione della serie
    T50 Genuine Arrow Staples – Steel > Arrow Australia
    Essay Format - A Complete Writing Guide with Examples
    13 Best Image Formats and When to Use Them
    Article information

    Author: Francesca Jacobs Ret

    Last Updated: 03/17/2023

    Views: 5768

    Rating: 4.8 / 5 (68 voted)

    Reviews: 83% of readers found this page helpful

    Author information

    Name: Francesca Jacobs Ret

    Birthday: 1996-12-09

    Address: Apt. 141 1406 Mitch Summit, New Teganshire, UT 82655-0699

    Phone: +2296092334654

    Job: Technology Architect

    Hobby: Snowboarding, Scouting, Foreign language learning, Dowsing, Baton twirling, Sculpting, Cabaret

    Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.